Renewable sites › Kingspan Insulation Solar Installation
Kingspan Insulation Solar Installation
Kingspan Insulation Solar Installation is an operational 5 MW solar farm in North Yorkshire, generating since 31 March 2014. Planning permission was granted on 12 March 2014, 3 months after submission. Operator of record: Kingspan Insulation/ Eneco.
Planning and build timeline
| Application submitted | 11 December 2013 |
| Permission granted | 12 March 2014 3 months after submission |
| Operational | 31 March 2014 1 months after consent |
Screening a site of your own?
North Yorkshire approves 96% of solar farms. Redline puts that number, and everything else the record holds, against your own boundary: the authority’s actual approval rate and decision times, every designation inside the red line, agricultural grade, 1 m LIDAR earthworks, how contested the grid is, and yield with a P90 — before you spend on a consultant.
Arrives prefilled with Kingspan Insulation Solar Installation’s recorded coordinate — swap in your own postcode or coordinates.
What this site sits on
The recorded coordinate falls on land surveyed as Grade 3 agricultural land. The published survey does not split Grade 3 into 3a and 3b, so this alone does not settle whether the land counts as best and most versatile.
REPD gives one representative coordinate per scheme, not the site boundary, so this describes the point on record rather than the whole site — a large site can straddle a designation edge. Boundaries come from planning.data.gov.uk, which publishes for England only.
North Yorkshire’s record on solar
North Yorkshire has decided 105 solar farms and approved 96%, taking a median of 2.7 months. See every solar farm decision in North Yorkshire →
Other built sites within 15 km
| Site | MW | Distance |
|---|---|---|
Solar Photovoltaics · Under Construction | 0.65 | 0.4 km |
Solar Photovoltaics · Operational | 5 | 0.6 km |
Battery · Under Construction | 57 | 5.2 km |
Battery · Under Construction | 320 | 5.3 km |
Wind Onshore · Operational | 10.3 | 7.5 km |
Landfill Gas · Operational | 3.9 | 7.7 km |
Battery · Operational | 150 | 8.8 km |
Battery · Operational | 20 | 9.1 km |
How big is Kingspan Insulation Solar Installation?
Kingspan Insulation Solar Installation has a recorded installed capacity of 5 MW. That figure is the capacity registered in REPD, which is the scheme as consented — the metered output of a site can differ.
Who operates Kingspan Insulation Solar Installation?
REPD records the operator as Kingspan Insulation/ Eneco. Ownership of built renewable assets changes hands regularly and REPD is published quarterly, so treat this as the operator of record rather than confirmation of who owns it today.
When was Kingspan Insulation Solar Installation approved and built?
The application was submitted on 11 December 2013. Permission was granted on 12 March 2014, 3 months later. The site became operational on 31 March 2014, 1 months after consent.
Source: Renewable Energy Planning Database (REPD), Department for Energy Security and Net Zero, Open Government Licence v3.0, plus planning designation boundaries from planning.data.gov.uk (England only). REPD is published quarterly and covers schemes of roughly 150 kW and above. Capacity is the installed capacity on record, not metered generation. Operator is the operator of record at the last extract, not confirmation of present ownership. Reference 1294.
Novarly Parcel · official public data, read properly · parcel.novarly.com
All sites · Screen your own site · Planning by council · Coal mining search by postcode