Renewable sites › Crossness Sewage Works Turbine
Crossness Sewage Works Turbine
Crossness Sewage Works Turbine is an operational 2.5 MW onshore wind farm in Bexley, generating since 16 February 2014. Planning permission was granted on 16 December 2010, 1 months after submission. Operator of record: Thames Water Utilities.
Planning and build timeline
| Application submitted | 24 November 2010 |
| Permission granted | 16 December 2010 1 months after submission |
| Operational | 16 February 2014 38 months after consent |
Screening a site of your own?
Redline runs the record on your own boundary in Bexley: the authority’s actual approval rate and decision times, every designation inside the red line, agricultural grade, 1 m LIDAR earthworks, how contested the grid is, and yield with a P90 — before you spend on a consultant.
Arrives prefilled with Crossness Sewage Works Turbine’s recorded coordinate — swap in your own postcode or coordinates.
What this site sits on
The recorded coordinate falls on land surveyed as Urban agricultural land.
REPD gives one representative coordinate per scheme, not the site boundary, so this describes the point on record rather than the whole site — a large site can straddle a designation edge. Boundaries come from planning.data.gov.uk, which publishes for England only.
Other built sites within 15 km
| Site | MW | Distance |
|---|---|---|
Sewage Sludge Digestion · Operational | 5.7 | 0 km |
Solar Photovoltaics · Operational | 1.5 | 0.7 km |
Battery · Under Construction | 2.5 | 1 km |
Wind Onshore · Operational | 5.9 | 1.9 km |
Anaerobic Digestion · Operational | 1.4 | 2.1 km |
Anaerobic Digestion · Operational | 1.4 | 2.5 km |
Solar Photovoltaics · Operational | 0.62 | 2.7 km |
Wind Onshore · Operational | 2 | 3 km |
How big is Crossness Sewage Works Turbine?
Crossness Sewage Works Turbine has a recorded installed capacity of 2.5 MW. That figure is the capacity registered in REPD, which is the scheme as consented — the metered output of a site can differ.
Who operates Crossness Sewage Works Turbine?
REPD records the operator as Thames Water Utilities. Ownership of built renewable assets changes hands regularly and REPD is published quarterly, so treat this as the operator of record rather than confirmation of who owns it today.
When was Crossness Sewage Works Turbine approved and built?
The application was submitted on 24 November 2010. Permission was granted on 16 December 2010, 1 months later. The site became operational on 16 February 2014, 38 months after consent.
Source: Renewable Energy Planning Database (REPD), Department for Energy Security and Net Zero, Open Government Licence v3.0, plus planning designation boundaries from planning.data.gov.uk (England only). REPD is published quarterly and covers schemes of roughly 150 kW and above. Capacity is the installed capacity on record, not metered generation. Operator is the operator of record at the last extract, not confirmation of present ownership. Reference 3862.
Novarly Parcel · official public data, read properly · parcel.novarly.com
All sites · Screen your own site · Planning by council · Coal mining search by postcode