Renewable sites › Ranson Moor Wind Farm (Phase 2)
Ranson Moor Wind Farm (Phase 2)
Ranson Moor Wind Farm (Phase 2) is an operational 4 MW onshore wind farm in Fenland, generating since 1 May 2007. Planning permission was granted on 23 February 2007, 9 months after submission. Operator of record: EcoGen Projects / Fenpower.
Planning and build timeline
| Application submitted | 18 May 2006 |
| Permission granted | 23 February 2007 9 months after submission |
| Operational | 1 May 2007 2 months after consent |
Screening a site of your own?
Fenland approves 85% of onshore wind schemes. Redline puts that number, and everything else the record holds, against your own boundary: the authority’s actual approval rate and decision times, every designation inside the red line, agricultural grade, 1 m LIDAR earthworks, how contested the grid is, and yield with a P90 — before you spend on a consultant.
Arrives prefilled with Ranson Moor Wind Farm (Phase 2)’s recorded coordinate — swap in your own postcode or coordinates.
What this site sits on
The recorded coordinate falls on land surveyed as Grade 2 agricultural land.
REPD gives one representative coordinate per scheme, not the site boundary, so this describes the point on record rather than the whole site — a large site can straddle a designation edge. Boundaries come from planning.data.gov.uk, which publishes for England only.
Fenland’s record on onshore wind
Fenland has decided 20 onshore wind schemes and approved 85%, taking a median of 12.8 months. See every onshore wind scheme decision in Fenland →
Other built sites within 15 km
| Site | MW | Distance |
|---|---|---|
Wind Onshore · Operational | 6 | 0.5 km |
Solar Photovoltaics · Under Construction | 0.15 | 1.3 km |
Wind Onshore · Operational | 1.5 | 3.1 km |
Wind Onshore · Operational | 10.3 | 3.1 km |
Solar Photovoltaics · Operational | 4.7 | 4.8 km |
Solar Photovoltaics · Operational | 5 | 4.8 km |
Wind Onshore · Operational | 6 | 5.7 km |
Solar Photovoltaics · Operational | 4.6 | 6 km |
How big is Ranson Moor Wind Farm (Phase 2)?
Ranson Moor Wind Farm (Phase 2) has a recorded installed capacity of 4 MW. That figure is the capacity registered in REPD, which is the scheme as consented — the metered output of a site can differ.
Who operates Ranson Moor Wind Farm (Phase 2)?
REPD records the operator as EcoGen Projects / Fenpower. Ownership of built renewable assets changes hands regularly and REPD is published quarterly, so treat this as the operator of record rather than confirmation of who owns it today.
When was Ranson Moor Wind Farm (Phase 2) approved and built?
The application was submitted on 18 May 2006. Permission was granted on 23 February 2007, 9 months later. The site became operational on 1 May 2007, 2 months after consent.
Source: Renewable Energy Planning Database (REPD), Department for Energy Security and Net Zero, Open Government Licence v3.0, plus planning designation boundaries from planning.data.gov.uk (England only). REPD is published quarterly and covers schemes of roughly 150 kW and above. Capacity is the installed capacity on record, not metered generation. Operator is the operator of record at the last extract, not confirmation of present ownership. Reference 2953.
Novarly Parcel · official public data, read properly · parcel.novarly.com
All sites · Screen your own site · Planning by council · Coal mining search by postcode