Novarly ParcelRenewable sites

Renewable sitesLascar Works

Lascar Works

Lascar Works is an operational 20 MW battery storage site in Bury, generating since 26 June 2019. Planning permission was granted on 23 May 2018, 6 months after submission. Operator of record: Anesco.

20 MW
Capacity
as recorded in REPD
Operational
Status
since 26 June 2019
Battery
Technology
Anesco
Bury
Authority
England

Planning and build timeline

Application submitted30 November 2017
Permission granted23 May 2018
6 months after submission
Operational26 June 2019
13 months after consent

Screening a site of your own?

RedlineUK · £39

Redline runs the record on your own boundary in Bury: the authority’s actual approval rate and decision times, every designation inside the red line, agricultural grade, 1 m LIDAR earthworks, how contested the grid is, and yield with a P90 — before you spend on a consultant.

Screen a site here£39

Arrives prefilled with Lascar Works’s recorded coordinate — swap in your own postcode or coordinates.

Consent ClockUK · Free

Granted years ago. Still not built. Every consented battery storage scheme in the UK, computed against its statutory commencement deadline — which consents are about to lapse, and where.

Open Consent Clock →

What this site sits on

The recorded coordinate falls on land surveyed as Urban agricultural land.

REPD gives one representative coordinate per scheme, not the site boundary, so this describes the point on record rather than the whole site — a large site can straddle a designation edge. Boundaries come from planning.data.gov.uk, which publishes for England only.

Other built sites within 15 km

SiteMWDistance
Liquid Air Energy Storage · Operational
52.8 km
Landfill Gas · Operational
4.12.9 km
Solar Photovoltaics · Under Construction
3.995.5 km
Battery · Under Construction
407.7 km
Battery · Under Construction
207.7 km
Wind Onshore · Operational
658.2 km
EfW Incineration · Operational
10.88.2 km
Landfill Gas · Operational
18.6 km

How big is Lascar Works?

Lascar Works has a recorded installed capacity of 20 MW. That figure is the capacity registered in REPD, which is the scheme as consented — the metered output of a site can differ.

Who operates Lascar Works?

REPD records the operator as Anesco. Ownership of built renewable assets changes hands regularly and REPD is published quarterly, so treat this as the operator of record rather than confirmation of who owns it today.

When was Lascar Works approved and built?

The application was submitted on 30 November 2017. Permission was granted on 23 May 2018, 6 months later. The site became operational on 26 June 2019, 13 months after consent.

Source: Renewable Energy Planning Database (REPD), Department for Energy Security and Net Zero, Open Government Licence v3.0, plus planning designation boundaries from planning.data.gov.uk (England only). REPD is published quarterly and covers schemes of roughly 150 kW and above. Capacity is the installed capacity on record, not metered generation. Operator is the operator of record at the last extract, not confirmation of present ownership. Reference 7464.

Novarly Parcel · official public data, read properly · parcel.novarly.com

All sites · Screen your own site · Planning by council · Coal mining search by postcode